All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Calder Park Spring/Summer Street Series 08/09
PostPosted: Fri Aug 08, 2008 10:38 pm 
Offline
Rotary?... What The?

Joined: Sun Dec 16, 2007 4:42 pm
Posts: 45
Location: Melbourne
2008 - 2009 Spring - Summer Street Series

Round - Date

1 - Sunday 7th September 2008
2 - Sunday 5th October 2008
3 - Sunday 19th October 2008
4 - Saturday 8th November 2008
5 - Friday14th November 2008
6 - Saturday 22nd November 2008
7 - Saturday 6th December 2008
8 - Saturday 20th December 2008
9 - Saturday 17th January 2009
10 - Saturday 24th January 2009
11 - Saturday 7th February 2009
12 - Saturday 28th February 2009
13 - Saturday 14th March 2009
14 - Saturday 28th March 2009

Street Series Rules & Regulations

All cars must be fully street registered
Drivers must have a current valid drivers licence
Full engineers report for modifications to be presented on each day of racing
Street tyres only - [No Slicks] - MT ET Drag Radials are OK
Open exhaust permitted
No tow vehicles
No burnouts past start line
Nitrous bottle and lines not permitted in unblown classes
Scutineers and managments decision is final and no correspondence to be entered into

Classes - Heads Up Racing

Blown = Nitrous, Superchargers, & Turbos permitted
Unblown = [aspirated] Nitrous, Superchargers & Turbos NOT permitted

V8 Blown
V8 Unblown
V6 - 6 Cylinder Blown
V6 - 6 Cylinder Unblown
4 Cylinder Blown
4 Cylinder Unblown
Rotary Blown
Rotary Unblown
Bikes Blown
Bikes Unblown

8 Quickest entries in each category will qualify for the finals each round

Street Meets Hours Of Racing

Gates open 10.00 am - Scruitineering Opens 11.00 am

Saturdays
12.00 noon to 5.00 pm - Qualifying for street categories
12.00 noon to 5.30 pm - Open Racing
5.30 pm to 6.00 pm - Break & Seeding
6.00 pm to 10.00pm Finals & Grudge Racing

Sundays
12.00 noon to 5.00 pm - Qualifying for street categories
12.00 noon to 5.30 pm - Open Racing
5.30 pm to 6.00 pm - Break & Seeding
6.00 pm to 8.00 pm [approx] Finals & Grudge Racing

Presentation

Trophies for "Best presented Car & Bike"
Trophies for "quickest Reaction Time"
Cash Prize & Trophy will be awarded to winner & runner-up in each category
Winner in each category will be awarded 10 points
Runner-up in each category will be awarded 5 points
The competitor with the most points at the end of the spring-summer series will be awarded the following prizes:

King of the Hill trophy and sponsors prizes
AMC Membership for one year
5 Free Entries for the next season
Their name on the AMC Calder Park Website

AMC 9 Second Club

Open to street categories only
Street category rules apply to qualify for this club
Club members names will be displayed in the 9 Second Club on the AMC Calder Park Website
A "9 second" trophy will be awarded to each competitor that achieves a time of 9.99 seconds of faster

Full details and updates can be found on the Calder Park website - http://www.calderpark.com.au/losd_street_series.shtml

If you have any questions please call AMC Calder Park direct on 03 9081 0800 or email nez@calderpark.com.au


Last edited by SLYRX4 on Tue Aug 12, 2008 10:48 pm, edited 1 time in total.

Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Fri Aug 08, 2008 11:16 pm 
Offline
Searching For More Power
User avatar

Joined: Wed Jul 17, 2002 1:14 pm
Posts: 1395
Location: Melbourne East
hmmm.....
sounds like a fun way to embarrass myself :lol:

I reckon i might be up for a bit of this action!


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Sun Aug 10, 2008 11:19 pm 
Offline
Mazda Approved Mechanic

Joined: Fri May 23, 2008 5:06 pm
Posts: 181
Location: where THE ROTA lives :)
mmmm

cant wait..... mine should be al ready to hit the track by then.... :)

_________________
2SUS CUSTOM RESPRAYS

CKT TRIMMING

ALL RACE FABRICATIONS

MAZTECH


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Mon Aug 11, 2008 6:15 pm 
Offline
Mazda Approved Mechanic
User avatar

Joined: Tue May 06, 2008 7:12 pm
Posts: 188
Location: Sunshine, Melbourne.
l'm in for a round or two


Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 9:23 pm 
Offline
The Bug Has Bitten
User avatar

Joined: Mon Feb 14, 2005 7:46 pm
Posts: 471
Location: melbourne
full engineers report needed for all mods...ppfft!

considering you need an engineers for a pod filter there will be no one racing :laugh:

oh but an open exhaust is steet spec.. :? :?


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 10:15 pm 
Offline
The Bug Has Bitten
User avatar

Joined: Wed Feb 20, 2008 4:49 pm
Posts: 253
Yeah your right buz138,they need to re-think there rules ,how many street cars are engineered for the mods they have ,wont get many cars racing


Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 10:24 pm 
Offline
Rotor Junkie
User avatar

Joined: Sat Dec 15, 2007 9:46 pm
Posts: 5173
Location: The Taylors Hill Massive
Can i bring a note from my mum?

_________________
HOEDOWN '09
ROTANG
Image


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 10:28 pm 
Offline
Rotary?... What The?

Joined: Sun Dec 16, 2007 4:42 pm
Posts: 45
Location: Melbourne
buz 138 wrote:
full engineers report needed for all mods...ppfft!

considering you need an engineers for a pod filter there will be no one racing :laugh:

oh but an open exhaust is steet spec.. :? :?



It's ok guys dont panic #-o you don't need an engineers for a pod filter, you need to pass an emmisions test :gay: :laugh:


Engineers cert will be required for things like engine swaps as in car that didn't come out with that engine, example LJ with a 350 etc

Superchargers, Turbos, Wheel Tubs.. thats about it..


Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 10:49 pm 
Offline
Rotor Junkie
User avatar

Joined: Sat Dec 15, 2007 9:46 pm
Posts: 5173
Location: The Taylors Hill Massive
OK, but this will mean I won't be able to run my 13B-T @ Calder as it is not engineered yet. Is there still going to be an event similar to the legal off-street drags where these rules are not applied?

_________________
HOEDOWN '09
ROTANG
Image


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 11:09 pm 
Offline
Rotary?... What The?

Joined: Sun Dec 16, 2007 4:42 pm
Posts: 45
Location: Melbourne
ROTANG wrote:
OK, but this will mean I won't be able to run my 13B-T @ Calder as it is not engineered yet. Is there still going to be an event similar to the legal off-street drags where these rules are not applied?


Did your model car come out with a rotary ?

The street series is run in conjunction with the legal off street drags, so you can still run on the same day just not in the street series if your car doesnt pass street series rules.

The AMC / Calder Park are about to announce an Open Drag racing series as well.


Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 12, 2008 11:44 pm 
Offline
Rotor Junkie
User avatar

Joined: Fri Jul 19, 2002 1:51 pm
Posts: 5017
Location: Melbourne, the only place to be!
Engineers isn't here or there, just don't run in the series competition :roll: . I can see whay they have done it that way, as street trim causes all sorts of dramas with people.

I heard that PAC run an unoffical street class at WSID, car must be in complete street trim, no stripped out interior, steel panels, DOT tyres and rotors run a max 12psi and piston cars a max 24psi.

_________________
Toys that keep me happy!


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Wed Aug 13, 2008 9:26 pm 
Offline
Moderator
User avatar

Joined: Mon Feb 21, 2005 3:56 pm
Posts: 4493
Location: Melbourne
sounds interesting...

_________________
UZNPSI TURBO CRAFT
All your turbo needs
Image Image Image Image


Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Wed Aug 13, 2008 10:44 pm 
Offline
Get a Girlfriend
User avatar

Joined: Thu May 13, 2004 3:36 pm
Posts: 2406
Location: Melbourne
yer if the car i had was registered..

_________________
blowies from lowies


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Thu Aug 14, 2008 1:11 am 
Offline
Rotary?... What The?

Joined: Sun Dec 16, 2007 4:42 pm
Posts: 45
Location: Melbourne
Ok here is a few updates and info to clear some of the questions up..

This series will be run in conjunction with the normal Legal Off Street Drag Meetings, so for those that do not want to compete or cars than do not meet the street series rules you can race as per normal in the LOSD

Engineers Certificate will be required

1. If the original engine the car came with has been replaced with bigger engine that was not an option on the model vehicle.
2. If the supercharger/s or turbocharger/s were not factory fitted or an option on that model.
3. If the rear chassis or rear wheel tubs have been altered in any way other than factory specifications.

That is all for the engineering side of things.

Tyres

Must be radials with tread! NO SLICKS
M/T ET Drag Radails are approved, so if you have any doubts they would be your best choice.

Other items that ARE approved

NOS - may be used but you must run in the blown class, even if you have only NOS lines fitted but no bottle, you still must run in the blown class.
Roll Cages - any vehicle running quicker than 11.00 MUST have an approved roll cage. Anyone can have a roll cage fitted as long as it has the required protective padding!
Wheels - no restrictions
Open Exhausts - no restrictions
Diff Changes - no restrictions other than chassis and wheel tub rules as above.
Transmission - no restrictions

All compeditor must meet the general Calder Park saftey regulations which you can find at the link below
http://www.calderpark.com.au/losd_regulations.shtml

Legal Off Street Drags & Sping/Summer Street Series Hours Of Racing will be

Saturdays

Gates open 10.00 am
10.00 am to 6.00 pm – Scutineering (approximately)
12.00 noon to 5.00 pm - Qualifying for street categories
12.00 noon to 5.30 pm - Legal Off Street Open Racing
5.30 pm to 6.00 pm - Dinner Break & Seeding
6.00 pm to 10.00pm Finals & Grudge Racing
Presentations 10.15 pm

Sundays

Gates open 10.00 am
10.00 am to 4.00 pm – Scutineering (approximately)
12.00 noon to 5.00 pm - Qualifying for street categories
12.00 noon to 5.30 pm - Legal Off Street Open Racing
5.30 pm to 6.00 pm - Dinner Break & Seeding
6.00 pm to 8.00 pm [approx] Finals & Grudge Racing
Presentations 8.15 am

Presentation

To be held on the start line at the conclusion of each meet

Trophies for "Best presented Car & Bike" each round
Trophies for "quickest Reaction Time" each round
Prize Money & Trophy will be awarded to winner & runner-up in each category each round
Winner in each category each round will be awarded 10 points
Runner-up in each category each round will be awarded 5 points
The competitor with the most points at the end of the spring-summer series will be awarded the following prizes:

King of the Hill trophy and sponsors prizes
AMC Membership for one year
5 Free Entries for the next season
Their name on the AMC Calder Park Website

Round results will be posted on this page after each round
http://www.calderpark.com.au/losd_stree ... ults.shtml

Points Top Ten in each category will be posted on this page after each round
http://www.calderpark.com.au/losd_stree ... ings.shtml

Entry & Saftey forms

These forms are available for download from the website, to save yourself and everyone else time we ask that you please download them and fill them in before you arrive. They can be found here > http://www.calderpark.com.au/losd_forms.shtml

Keep an eye on the website for any updates or changes
http://www.calderpark.com.au/losd_street_series.shtml

Looking forward to a fun summer of racing...

Cheers


Top
 Profile E-mail  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Thu Aug 14, 2008 2:26 pm 
Offline
Boost Me Up
User avatar

Joined: Sun Aug 03, 2008 9:25 pm
Posts: 644
Location: Melbourne
Should be good hopefully its not as shity as befor


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Sun Aug 17, 2008 3:16 pm 
Offline
The Bug Has Bitten

Joined: Wed Jun 26, 2002 9:17 am
Posts: 375
Location: adelaide
How can you ask for engineers reports when you can't get a cage engineered for road use but you are required to run a point one for if you are running quicker than 11.00. There for the car would not be a legaly engineered vechile.Yes you may have cert for the mods on the engine or driveline but i dont know any state that allows you to run a 6 point cage for street use legally :?


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Sun Aug 17, 2008 4:19 pm 
Offline
Searching For More Power
User avatar

Joined: Wed Jul 17, 2002 1:14 pm
Posts: 1395
Location: Melbourne East
You can here in VIC. Have a read of this document, apparently you don't even need a certificate if it complies with all the measurements etc. listed and there is no modification to the vehicle structure, seats or seatbelts.

Tell that to a copper though :lol:

http://www.vicroads.vic.gov.au/NR/rdonl ... /VSI28.pdf


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 19, 2008 6:28 pm 
Offline
Get a Girlfriend
User avatar

Joined: Thu May 13, 2004 3:36 pm
Posts: 2406
Location: Melbourne
no need for engineers for the roll cage, but yer tell the cop that, unless u print out the info off the vic roads website

_________________
blowies from lowies


Top
 Profile  
 
 Post subject: Re: Calder Park Spring/Summer Street Series 08/09
PostPosted: Tue Aug 19, 2008 8:07 pm 
Offline
Rotary?... What The?

Joined: Sun Dec 16, 2007 4:42 pm
Posts: 45
Location: Melbourne
Nathos wrote:
no need for engineers for the roll cage, but yer tell the cop that, unless u print out the info off the vic roads website


I keep a copy of that vic roads paperwork, my engineers certificate, adr paperwork for my seats and a few other things in my glove box, the coppers luv it, never had a hassle..


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group