So my boyfriend recently bought a mazda rotary 1979 model.
Unfortunately the fan belt was broken...
Im not sure if this is relevant, but the number that was imprinted on the belt was - 300L150HSN, it was quite a thick belt..
Does anybody know where i can get one??
please help me.
if its the fan belt,, ( goes around water pump and alternator ) then it can be 11a 785 or 11a800 , depending on the water pump pulley and the alt pulley
most will use 11a 800,, but if thats at end of adjustment then you need 11a 785
do not drive the car without a belt,, you will have no water pump working and it WILL cook the engine
its also very prudent that you grab a 10a 550 belt,, this is fitted on the spare pulley V for main pulley and water pump only ( no tensioner )
you pull this on like a bike chain, by rotating the pulley till it pulls on,, and you may have to go back then a half turn to turn the belt from inside out
if you ever brake another fan belt,, this 10a 550 will continue to drive the water pump,, saving the engine
the 10a 550 belt is also necessary if you have deleted the air pump ( its likely already gone ) ,, and prevents the 11a800 from squeeling and wearing quickly